Vettas (IOBE): Industry accounts for 13.1% of GDP

IOBE data paint a picture of Greek industry. The messages from Tasoulas, Hardouvelis and Stasinopoulos. The business stories of five export-oriented manufacturers.

Vettas (IOBE): Industry accounts for 13.1% of GDP

This article is an AI translation of an original piece published in Greek. Read original

Greek industry is recovering, having increased its contribution to the economy, exports and employment, but it has yet to close the significant gap with the European average. The investment gap, the need to raise productivity and the drive to become more export-oriented are emerging as decisive challenges for the years ahead.

This was the central message of the event “Greek Industry – Yesterday, Today, Tomorrow”, held on Thursday, 12 November at the National Gallery and co-organised by the Foundation for Economic and Industrial Research (IOBE), Hellenic Production and the National Bank of Greece Cultural Foundation (MIET).

Held under the auspices of the President of the Republic, the event sought to link the history of Greek industry with its current position and growth prospects, at a time when geopolitical uncertainty, the energy transition and new technologies are reshaping the terms of international competition.

IOBE findings

Nikos Vettas, IOBE’s director-general and a professor at the Athens University of Economics and Business, set out the current picture of industry, presenting data that highlight both the sector’s importance and the structural weaknesses of the Greek economy.

According to the presentation, industry accounted for 13.1% of GDP in 2025, with manufacturing representing 9.7%. Despite the recovery of recent years, manufacturing’s corresponding share in the European Union stands at 14.2%, confirming that Greece continues to lag significantly behind.

Industry employs about 501,000 people, while its total contribution to public revenues is estimated at €22.9bn. It also has a strong multiplier effect on the economy: each unit of value added is associated with a total impact of 2.4 units on GDP, while the corresponding employment multiplier is 3.

Industry’s productivity is particularly notable, at 67% higher than the average for the Greek economy. Even so, a significant gap with European performance remains.

The performance of industrial goods exports has been striking: from €10.4bn in 2002, they reached €44.3bn in 2025, more than quadrupling. Manufacturing exports, excluding petroleum products, rose by 59% between 2019 and 2025, reaching €30.6bn.

By contrast, manufacturing investment intensity remains markedly below the European average, standing at 13.9% in 2025, compared with 22.6% in the EU.

The research also highlighted significant regional disparities. In Central Greece, industry accounts for 42% of regional gross value added, while in Western Macedonia the figure is 27%. By contrast, it stands at just 12% in Attica and 5% in the Ionian Islands.

The presentation concluded that a transition to a stronger productive model will require greater investment in human resources, technology and research, the production of higher-value goods and more meaningful participation in international production chains.

Remarks by the President and Gikas Hardouvelis

The event opened with remarks by National Bank of Greece chairman and former finance minister Gikas Hardouvelis, who stressed the importance of industry to the country’s long-term growth.

He noted that, although manufacturing’s share of GDP had risen from 7.8% in 2019 to 9.7% in 2025, the gap with the rest of Europe remained wide. He identified economic stability, competitive energy costs, investment financing, modern infrastructure and stronger research and human capital as key requirements for strengthening the productive base.

President of the Republic Konstantinos Tasoulas then broadened the discussion, linking a country’s productive capacity with its strategic autonomy and national security.

In his remarks, he highlighted the need to reduce dependence on foreign countries, noting that recent international crises had exposed the vulnerabilities of economies that rely too heavily on imports. In this context, strengthening domestic production and the ability to export competitive goods are, he said, elements of economic resilience as well as national strength.

K. Kostis: The post-war boom and the decline of industry

Journalist Giorgos Mangiiriadis discussed the history of Greek industry with Kostas Kostis, emeritus professor at the National and Kapodistrian University of Athens and director of MIET.

Kostis spoke about the country’s post-war industrialisation, particularly during the period from 1952 to 1979, when the expansion of production played a decisive role in transforming the Greek economy and improving living standards.

He recalled that industrial development was then a widely accepted priority, and that by the early 1970s the industrial sector had assumed a particularly important position in the economy.

Subsequently, however, changes in the international economic environment, globalisation, limited competitiveness and weaknesses in the domestic production system contributed to industry’s gradual decline.

M. Stasinopoulos: Putting industry back at the heart of national priorities

Michalis Stasinopoulos, chairman of the board of Viohalco and Hellenic Production, then stressed the need to redefine the country’s development priorities.

Stasinopoulos noted that the deindustrialisation seen in many Western economies in previous decades had prompted a reassessment of policy priorities, bringing industrial production back into focus.

He argued that Greece needed to place greater emphasis on investment in strategic sectors, the development of strong production ecosystems and improved competitiveness.

Despite progress on public finances and improvements in key economic indicators, he said, real convergence with Europe’s more advanced economies required a deeper shift in the production model, with industry taking on a more central role.

Five business stories with a common thread: international reach

The event concluded with a discussion involving representatives of five Greek family-owned industrial companies, moderated by Rania Aikaterinari, a member of ElvalHalcor’s board and vice-president of the Hellenic Federation of Enterprises (SEV).

The discussion focused on the transition to a new generation of management, investment in technology and the importance of international expansion for businesses that have succeeded in building a global presence.

ELVIAL chairwoman Tania Tzika described the journey of a company founded in 1990 that now exports to more than 40 countries, selling about 70% of its output in international markets.

She highlighted the company’s long-term investment planning, noting that since 2005 it had invested more than €120m in its production facilities, making use of automation and robotics.

She also stressed the importance of financial discipline, which had enabled the company to weather the financial crisis without recording a loss-making year.

SABO chief executive Eugenia Koiliari outlined the company’s evolution from a small machine shop in Vasiliko, Evia, into an international industrial solutions group operating in about 65 countries.

As she explained, the company initially developed in the brickmaking plant sector before expanding into industrial automation, robotics, waste management and other high-technology applications.

A decisive choice, she said, was the company’s early move into foreign markets, which pushed it to continually improve its performance in quality, innovation and customer service.

From machine tools to AI and exports

Evangelos Gizelis, CEO of Gizelis Group, described an industrial journey that began in 1968 and led to the development of advanced machine tools and robotics systems.

The company exports sheet-metal processing machinery to 60 countries, with the United States now its largest market, accounting for more than 60% of its turnover.

He emphasised the potential of Physical AI—the integration of artificial intelligence into physical mechanical and robotic systems—as an area that could create new opportunities for Greek industry in the face of international competition.

Aristeidis Georgantas, chairman and chief executive of SCLAVOS, also spoke about how a company founded in 1948 in Greece’s textile industry had managed to establish an international presence, despite the sector’s significant decline in the domestic market.

Georgantas explained that the company had chosen not to compete with Asian manufacturers on low costs, but instead to invest in specialisation and develop technologies for specific categories of fabric.

He also voiced concern about the limited links between education and industry, stressing the need for young people to gain early exposure to real production processes.

Finally, Alexandros Katrouzos, CEO of NEOTEX and chairman of the Association of Hellenic Chemical Industries, outlined the transformation of the family business from an importing and trading company into a manufacturing and export business.

He said the company had grown from virtually no exports in 2003 to operating in more than 80 countries today, while more than tripling its workforce.

He placed particular emphasis on investment in research and development, the production of specialised waterproofing systems and the creation of modern management structures, which had enabled the company to become internationally competitive.

The five business stories shared a common conclusion: Greek industry has companies capable of competing internationally when they combine expertise with investment, continuity in management and the production of high-value-added goods.

The challenge, as emerged from the event as a whole, is to scale up these success stories and help drive a broader transformation of the Greek economy.

v
Privacy